Pendulum Impact Tester, 300 Nm WP 410

Pendulum Impact Tester, 300 Nm

Type: WP 410
Name: Pendulum Impact Tester, 300 Nm
Categorie:
Technical Description

The pendulum impact testing machine is a solid unit specially designed for engineering lectures. It is used for performing the notched bar impact bending test with increased impact energy up to 300Nm. Two impact energy settings are available using an additional weight on the hammer. With this unit, a quality test can be performed on different metallic materials. The unit can, however, also be used for non-metallic specimens. The notched bar impact work required to deform the specimen can be read off directly from a trailing pointer on a large scale. An electromechanical two-hand trigger increases safety for the user. As an accessory, the system can also be equipped with an electronic goniometer, a measuring amplifier and software so that measured values can be read out on a PC and evaluated there.

 

A protection cage for the impact tester is required to ensure a safe and hazard-free operation, i.e. WP 410.50. 

 

Learning Objectives / Experiments
- Determination of notched bar impact work
- Determination of notched bar impact strength
- Evaluation of fracture surface characteristics
- Influence of notch shape on the notched bar impact
  work
- Influence of material and thermal treatment on the
  notched bar impact work
- Influence of specimen temperature on the notched
  bar impact work
  + notched bar impact work-temperature curve
Features
* Notched bar impact bending test with increased
  impact energy up to 300Nm1
* Unit designed in accordance with DIN 50115 and
  DIN 512221
* Two impact energy levels1
* Electromechanical two-hand trigger
Available accessories
WP 300.09 -- Laboratory Trolley
WP 410.01 -- Set of 10 ISO-V Specimens, St37k
WP 410.02 -- Set of 10 ISO-V Specimens, Copper
WP 410.03 -- Set of 10 ISO-V Specimens, Brass
WP 410.20 -- System for Data Acquisition
WP 410.50 -- Protection Cage for Pendulum Impact Tester
Alternative products
WP 400 -- Pendulum Impact Tester, 25 Nm
Specification

[1] Laboratory experiment on the performance of the notched bar impact bending test with increased energy
[2] Quality testing and evaluation of the fracture behaviour of metallic materials
[3] Pendulum impact testing machine in accordance with DIN 51222
[4] Capacity to perform work 150Nm and 300Nm
[5] Hammer impact speed 5.5m/s
[6] Increased safety due to electromechanical two-hand trigger
[7] PC data acquisition WP 410.20 available

[8] Protection cage WP 410.50 available

[9] 230V, 50/60Hz, 1 phase or 120V, 50/60Hz, 1 ph.

 

Technical Data

Capacity to perform work: 150Nm and 300Nm
Hammer mass: 9.9kg and 19.8kg
Pendulum length: 840mm
Fall angle: 150°
Impact speed of the hammer: 5.5m/s

 

Dimensions and Weight l x w x h : 800 x 600 x 1460 mm
Weight : approx. 360 kg Required for Operation 230V, 50/60Hz, 1 phase or 120V, 50/60Hz, 1 ph. Scope of Delivery

1 complete pendulum impact testing machine

1 set of ISO V notched bar specimens
1 set of additional weights
1 instruction manual

Order Details

020.41000  WP 410  Pendulum Impact Tester, 
                     300 Nm


Documentatie

Foto's