Hydraulic Universal Material Tester, 50kN WP 310

Hydraulic Universal Material Tester, 50kN

Type: WP 310
Name: Hydraulic Universal Material Tester, 50kN
Categorie:
Technical Description

  Due to the clear, straightforward layout of this materials tester, tests can be observed in detail during all phases; this is rarely possible on industrial testers. Nevertheless, the capacity of the tester is sufficient to carry out tests of an industrial nature. Simple operation and robust construction make the tester particularly suitable for student experiments.

  The tester is a vertical, hydraulically operated pillar tester with direct generation of both tensile and compressive forces. The height of the lower cross-member can be adjusted in steps for coarse adjustment. Cylindrical receptacles on the cross-members make the different experimental setups easy to change, e.g. wedge grips (accessory WP 310.05, as shown in pic. left). For experiments specimens according DIN 50125 can be used.

  Force and displacement are recorded by sensors, displayed and can be processed on a PC.

 

Learning Objectives / Experiments

Basic system for generating compression and tensile forces for material testing. Comprehensive accessories enable the following to be performed

- tensile test

- Brinell hardness testing
- compression test
- bending test
- shear test
- deep draw test

- spring testing

Features

* Hydraulically operated pillar tester with direct

  generation of force1
* Both tensile and compressive forces can be

  generated1
* Test force in both directions 50kN1
* Digital force and displacement displays1
* GUNT software for data acquisition

Available accessories
WP 300.03 -- Set of 4 Brinell Specimens: Aluminum, Copper, Steel, Brass
WP 300.12 -- Measuring Magnifier for Brinell Impression
WP 300.31 -- Set of 4 Brinell Specimens, Aluminum
WP 300.32 -- Set of 4 Brinell Specimens, Copper
WP 300.33 -- Set of 4 Brinell Specimens, Steel
WP 300.34 -- Set of 4 Brinell Specimens, Brass
WP 300.41 -- Set of 5 Deep Draw Specimens, Aluminum
WP 300.42 -- Set of 5 Deep Draw Specimens, Copper
WP 300.43 -- Set of 5 Deep Draw Specimens, Steel
WP 300.44 -- Set of 5 Deep Draw Specimens, Brass
WP 300.52 -- Set of 5 Shear Specimens, Copper
WP 310.01 -- Brinell Hardness Testing
WP 310.02 -- Device for Shear Tests
WP 310.03 -- Device for Bending Tests
WP 310.04 -- Compression Plates for Compression Tests
WP 310.05 -- Wedge Grips for Round & Flat Tensile Specimens
WP 310.06 -- Threaded Grips for Threaded End Tensile Specimens
WP 310.07 -- Holder for Dumbbell-Shaped Tensile Specimens
WP 310.08 -- Device for Testing Helical Springs
WP 310.09 -- Device for Testing Disc Springs
WP 310.10 -- Device for Deep Draw Tests
WP 310.11 -- Set of 10 Tensile Specimens B10x50 DIN 50125 M16, Steel (S235JRC+C)
WP 310.12 -- Set of 10 Tensile Specimens F10x50 DIN 50125, Steel (S235JRC+C)
WP 310.13 -- Set of 10 Dumbbell-Shaped Tensile Specimens, Steel (S235JRC+C)
WP 310.15 -- Set of 5 Compression Specimens, 4x Plastic, 1x Wood
WP 310.84 -- Set of 25 Bending Specimens, Cast Iron (EN-GJL-250)
Alternative products
WP 300 -- Universal Material Tester, 20 kN
Specification

[1] universal, hydraulically operated trainer for materials testing

[2] generating compression and tensile forces

[3] test force and travel velocity adjustable

[4] generation of test force via gear pump and doubleacting hydraulic cylinder

[5] force measurement via full bridge strain gauges with acoustic overload signal, max. overload 150%

[6] displacement measurement via linear potentiometer

[7] LED displays for force and displacement with zero and maximum value memory
[8] GUNT software for data acquisition via USB under Windows Vista or Windows 7
  

Technical Data

Working area, WxH: 300x925mm

Hydraulic test force generation

- test force: 0...50kN
- max. system pressure: 175bar
- max. piston stroke: 150mm

Gear pump

- max. flow rate: 1cm³/rotation

- power consumption: 0,55kW

 

Measuring ranges

- force: 0...50kN
- displacement: 0...150mm

LED displays

- measurement repetition rate: 2,5s-1

- 6 digits

 

Dimensions and Weight LxWxH: 1.050x800x2.300mm
Weight: approx. 380kg Required for Operation 230V , 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase Scope of Delivery

1 trainer

1 GUNT software CD + USB cable
1 instruction manual

Order Details

020.31000  WP 310  Hydraulic Universal Material

                                 Tester, 50kN


Documentatie

Foto's