Vibrations on Machine Foundations TM 182

Vibrations on Machine Foundations

Type: TM 182
Name: Vibrations on Machine Foundations
Technical Description

  An indispensible element of machine design is targeted reduction of vibrations. An elastic, vibration insulating installation of the machine avoids the transmission of harmful vibrations to the surroundings.
  The TM 182 can be used to investigate the problems of foundations and vibration isolation using a practical example. To do this, vibrations are generated and measured on a foundation. Springs are then used to try out different tunings and vibration absorbers are used to investigate absorption effects.
  The experimental setup consists of: “Machine”, foundation and frame. A vibration generator is used as the “machine”. This is installed on a foundation using springs and dampers. The foundation represents the surroundings and can be used to measure the effectiveness of the vibration isolation. Additional helical springs connect the foundation to the actual frame of the trainer. This double vibration isolation, combined with the high fixed weight of the frame, guarantees vibration-free laboratory operation, even under unfavourable experimental conditions. A switch cabinet is fixed to the frame, in which the controller, power supply and data acquisition are housed.
  The vibration generator consists of two independently driven imbalance sets. This enables different forces and force directions to be generated. Alternatively, a piston compressor (TM 182.01) can be used to generate

the vibrations.
  The vibration acceleration, speed and displacements are recorded. The operating vibration forms are also measured and represented.
  A software program is provided to control the operating states and acquire data.


Learning Objectives / Experiments
- familiarisation with vibrations occurring on
  machine foundations
- tuning foundations for various excitation forces
- investigation of vibration absorbers
- investigation of the influence of additional damping
- difference between metal springs and rubber
- measuring and evaluating vibrations
- measuring operating vibration forms

* Simulation of vibrations1
* Two-piece vibration generator, independently
* Double vibration isolation for vibration-free
   laboratory operation1
* Comprehensive accessories for individual setting

  of natural frequency and for various tunings

Available accessories
TM 182.01 -- Piston Compressor for TM 182
TM 182 Vibrations on Machine Foundations
Specification [1] representing and investigating vibrations on machine foundations
[2] vibration generator generates vibrations by imbalance
[3] vibration-free operation due to additional vibration isolation of foundation
[4] 2 brushless high power servo motors as the “machine” drive
[5] eccentricity, rotation frequency, direction of rotation, phasing and frequency ratio adjustable
[6] variable arrangement of vibration absorbers for absorption of vibrations
[7] vibration measurement using acceleration sensors
[8] inductive position sensor records the eccentricity of the imbalance masses
[9] GUNT software with control functions and data acquisition via USB under Windows Vista or Windows 7
[10] TM 182.01 piston compressor for use as alternative “real” vibration generator
  Technical Data Drive motors
- max. speed: 6000min-1
- max. torque: approx. 3,40Nm
“Machine” mounted on a plate
- mass: max. 26kg (incl. additional weights 4x 2kg)
- max. imbalance: 2x 5kgmm
- max. imbalance force: 2x 500N (up to 3000min-1)
- mass: max. 73kg (inc. additional weights 5x 9,4kg)
- min. natural frequency: 2,66Hz
Compression springs
Spring constant C: 2,44N/mm...139,53N/mm
- transverse rigidity Cq: 0,30N/mm...90,0N/mm
Measuring range
- acceleration: 50g
  Dimensions and Weight LxWxH: 1140x800x1170mm
Weight: approx. 311kg Required for Operation 230V, 50/60Hz, 1 phase Scope of Delivery 1 trainer
1 vibration generator
1 GUNT software CD + USB cable
1 set of instructional material Order Details

040.18200  TM 182  Vibrations on Machine