Training System: Position Control, HSI RT 060

Training System: Position Control, HSI

Type: RT 060
Name: Training System: Position Control, HSI
Technical Description

  This compact experimental unit offers every opportunity to learn the fundamentals of control engineering through experimentation on a linear position control system.

  The experimental setup is mounted on a housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A carriage can be moved by a DC motor via a toothed belt. The linear positioning is measured by a rotary encoder and delivered as a voltage signal. The output signal from the sensor is sent to the software controller. The output signal from the controller influences the motor current. The motor is automatically shut down if the carriage reaches one of the two end positions.

  The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the experimental unit and the PC is made via a USB port. 

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- fundamentals of control engineering based on the

  example of a linear position control system with

  integral control action
- open loop control response
- effects of different controller parameters and

  methods on the response of the closed loop

- recording of step responses 
  * reference variable
- controller optimisation
- software-based controlled system simulation
  * comparison of different controlled system




* Experimental unit with clear linear position control

* Extensive range of experiments on fundamentals of

  control engineering1
* State-of-the-art software for all experimental units

  of the RT 010 - RT 060 series, with extensive

  controller and recorder functions1
* Software-based simulation of the controlled system

Available accessories
WP 300.09 -- Laboratory Trolley
Alternative products
RT 010 -- Training System: Level Control, HSI
RT 020 -- Training System: Flow Control, HSI
RT 030 -- Training System: Pressure Control, HSI
RT 040 -- Training System: Temperature Control, HSI
RT 050 -- Training System: Speed Control, HSI
RT 010 - RT 060 Fundamentals of Process Control

[1] experimental unit for control engineering experiments
[2] linear position control of carriage with linear drive and gear motor
[3] rotary encoder as displacement sensor
[4] transparent protective cover
[5] 2 microswitches to shut down at end positions

[6] software-based controlled system simulation
[7] process schematic on front panel

[8] networkable GUNT software via USB under Windows Vista or Windows 7


Technical Data

DC motor
- transmission ratio: i=50
- speed: 85min-1
- torque: 200Nmm
Travel: max. 300mm
Max. traverse rate: 45mm/s
Scale: 0...300mm
Software controller configurable as P, PI, PID
- process schematic with controller type selection

  (manual, continuous controller, programmer)
- time functions
- simulation function


Dimensions and Weight LxWxH: 600x450x280mm
Weight: approx. 20kg Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase Scope of Delivery

1 experimental unit
1 GUNT software CD + USB cable

1 handbook: fundamentals of control engineering

   (RT 010 - RT 060)
1 manual for RT 060


Order Details

080.06000  RT 060  Training System:

                                 Position Control, HSI