Heat Pump HL 320.01

Heat Pump

Type: HL 320.01
Name: Heat Pump
Categorie:
HL 320.01 - A product from the GUNT 2E range
Technical Description

  The HL 320 modular system allows experiments on the generation, storage and use of heat from renewable energies. HL 320.01 is one module in this system and includes a heat pump that can be connected to different heat sources and consumers.
  The heat pump comprises a compressor, a condenser, an expansion valve and an evaporator. These components are connected to each other via a refrigeration circuit. The refrigerant circulates in the refrigeration circuit powered by the compressor. A source's thermal energy is absorbed at the evaporator. Additional energy is added to the evaporated refrigerant in the compressor. This energy can be output to a consumer as heat.
  On the HL 320.01 trainer, the condenser can be incorporated into a heating circuit consisting of various consumers. The evaporator can be connected to a brine circuit with different heat sources. The pipes with quick quick-release couplings, circulation pumps and accessories necessary to create these connections are provided.
  In practice and depending on the application, different system configurations are often required for optimal efficiency of a heating system. Using HL 320.01 and other HL 320 modules it is possible to systematically investigate the possible variants for incorporating a heat pump into a modern heating system. 

 Carefully structured instructional materials have been created for the recommended module combinations with the HL 320.01 module. As part of the documentation for the overall HL 320 system, these materials set out the basic principles and provide a step-by-step guide through the experiments.

 

Learning Objectives / Experiments
- Familiarisation with heat pump applications for
  heating rooms and hot water
- Using the heat pump for cooling
- Advantages and disadvantages of various
  system configurations (brine heat pump, air heat pump)
- Configuring and adjusting a heat pump controller
- Operating behaviour under varying heat supply
  and demand
- Dependence of the coefficient of performance on
   source and sink temperature
- Possibilities for optimising the seasonal
  performance factor
Features

 

* Trainer from the HL 320 modular system1
* Heat pump for operation with different sources1  
* Multiple system variants possible in conjunction
  with other HL 320 modules

Available accessories
HL 320.02 -- Conventional Heating
HL 320.03 -- Flat Plate Collector
HL 320.04 -- Evacuated Tube Collector
HL 320.05 -- Central Storage Module with Controller
HL 320.07 -- Underfloor Heating / Geothermal Energy Absorber
HL 320.08 -- Fan Heater / Air Heat Exchanger
Overview
HL 320 Modular System
Specification

[1] Heat pump for the HL 320 module system
[2] Connections for various heat sources and sinks
[3] One circulation pump and one safety module each with expansion vessel for heating and brine circuit
[4] Sensors for temperature, flow rate and pressure with connection to the controller 
[5] Controller with data logger and LAN connection for acquisition of measurement data and for controlling the system
[6] Software for transferring, displaying and evaluating the controller's measured data

 

Technical Data

Heat pump
- heating capacity: approx. 2,3 kW at 5/65°C
Heating and brine circuit pumps
- max. flow rate: 3m³/h
- max. head: 4m
Universal controller
- inputs: up to 16
- outputs: up to 16
- interfaces: DL bus, CAN, LAN


Measuring ranges
- heating and brine circuit
  temperature: 0...180°C
  flow rate: 0,02...1,5m³/h
  pressure: 0...4bar
- refrigeration circuit
  pressure: 0...30bar

Dimensions and Weight LxWxH: 1500x800x1700mm
Weight: approx. 125kg Required for Operation 230V, 50/60Hz, 1 phase Scope of Delivery 1 trainer
1 instruction manual for experiments with
   HL 320 modules Order Details 06.32001  HL320.01 Heat Pump

Documentatie

Foto's