Deformation of Curved-Axis Beams  FL 170

Deformation of Curved-Axis Beams 

Type: FL 170
Name: Deformation of Curved-Axis Beams 
Categorie:
Technical Description

  In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and two fixed support bearings or clamp fixings. The support bearings of an arch (such as a double-articulated arch) absorb forces vertically and horizontally. The ends of the arch in the bearings do not move. This produces the static arching effect of the system. In mechanical engineering, crane hooks and chain links are typical examples of a curved beam.

  FL 170 includes three different beams, borne on statically determinate supports: a circular beam, a semi-circular beam and a quadrant beam.

  The beam under test is loaded with weights. Dial gauges record its horizontal and vertical deformations.

  All three beams have the same cross-section and so the same 2nd moment of area. This enables test results to be directly compared.
  Simi-circular and circular beams are fixed to a bearing on the pillar. The quadrant beam is clamped into a bearing block.

  The various elements of the experiment are clearly laid-out and housed securely in a storage system.

  

Learning Objectives / Experiments
- bending behaviour of a curved-axis beam
  * circular beam
  * semi-circular beam
  * quadrant beam
- application of the principle of virtual forces (the force
  method) to calculate deformation
- 2nd moment of area
- comparison of calculated and measured
  deformations
Features
* Elastic deformation of curved-axis beams1
* Circular, semi-circular and quadrant beams
Available accessories
WP 300.09 -- Laboratory Trolley
Specification [1] elastic deformation of curved-axis beams under load
[2] 3 different beams with the same cross-section: circular beam, semi-circular beam, quadrant beam
[3] bearing block to fix the quadrant beam
[4] pillar with bearing to support the circular or semi-circular beam
[5] 3 dial gauges to record the horizontal and vertical deformation
[6] storage system to house the components
  Technical Data

Curved-axis beam
- radius: approx. 150mm
- cross-section WxH: 20x5mm
- material: steel, galvanised
Dial gauges
- measuring range: 0...20mm, graduations: 0,01mm
Weights
- 1x 1N (hanger)

- 2x 2N
- 1x 5N
- 1x 10N
- 4x 20N
 

Dimensions and Weight

LxWxH: approx. 400x300x650mm
Weight: approx. 21kg

LxWxH: approx. 1170x480x178mm (storage system)

Scope of Delivery 1 base plate with pillar
3 beams
3 dial gauges
1 set of weights
2 hexagon socket wrenches
1 storage system with foam inlay
1 set of instructional material
Order Details 021.17000  FL 170  Deformation of Curved-Axis 
                                Beams 

Documentatie

Foto's