Strain Gauge Training System FL 100

Strain Gauge Training System

Type: FL 100
Name: Strain Gauge Training System
Categorie:
Technical Description

  Strain gauges are used extensively in sensor systems to detect forces, moments and deformations.

  The FL 100 experimental unit provides a wide-ranging introduction to the fundamentals of measurement by strain gauges. Three test specimens for tension, bending and torsion are each fitted with four strain gauge measuring points. The strain gauges are wired in the full bridge. The specimens are loaded incrementally allowing for the strain reading to be sequentially monitored.

  The specimens can be inserted quickly and precisely into the frame. The strain gauge measuring range is protected by a Plexiglas cover, which also makes it clearly visible for inspection purposes. The measuring amplifier supplies the bridge supply voltage, and displays the load-dependent "bridge detuning" digitally in voltage values. The digital display also features a zero balancing function to allow for any preloading.

  The various elements of the experiment are clearly laid-out and housed securely in a storage system.

  Three additional tension bars are available as accessories, in brass (FL 100.01), copper (FL 100.02) and aluminium (FL 100.03), enabling the modulus of elasticity to be ascertained in experiments.

 

 

Learning Objectives / Experiments

- fundamentals of measuring with strain gauges
- strain gauge types and application techniques
- calculation of the mechanical deformations under
  tension, bending and torsion
- correlation between mechanical strain and
  electrical resistance in a strain gauge

 

With FL 100.01, FL 100.02, FL 100.03
- determination of the modulus of elasticity for
  various materials from the measurement data of a
  tensile test

Features
* Basic introduction to measurement with strain
  gauges1
* Test bars for tension, bending and torsion with strain gauge measuring points as full bridge1
* Universal 1-channel measuring amplifier
Available accessories
FL 100.01 -- Tension Rod, Brass
FL 100.02 -- Tension Rod, Copper
FL 100.03 -- Tension Rod, Aluminum
Alternative products
FL 102 -- Determining the Gauge Factor of Strain Gauges
Specification

[1] experimental unit investigating the fundamentals of strain gauge measurement
[2] tension, bending and torsion tests each with strain gauge measuring points in full bridge circuit
[3] strain gauge application areas protected by Plexiglas cover
[4] steel test bodies
[5] measuring amplifier with 4-digit digital display
[6] frame to house the measuring objects

[7] determination of modulus of elasticity on various materials using measuring objects FL 100.01, FL 100.02, FL 100.03
[8] storage system to house the components
 

Technical Data

Tension bar
- measuring length: 50mm
- cross-section: 2x10mm
Bending bar
- length: 385mm
- cross-section: 5x20mm
Torsion bar
- length: 500mm
- d=10mm
Weights, small: 10x 0,5N, 1x 1N (hanger)
Weights, large

- 1x 5N, 2x 10N, 1x 20N, 1x 5N (hanger)
Strain gauge measuring point: full bridge, 350Ω
Amplifier
- measuring range: +/-2mV/V
- resolution: 1µV/V
- zero balancing adjustment range: +/-1mV
- supply voltage: 10VDC
Frame opening WxH: 480x450mm
 

Dimensions and Weight LxWxH: 560x410x610mm (frame)
LxWxH: 600x400x320mm (storage system)
Weight: approx. 20kg Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase Scope of Delivery

1 frame
3 strain gauge test specimens
2 sets of weights
2 hexagon socket wrenches
1 measuring amplifier with strain gauge

   connecting cable
1 storage system with foam inlay
1 set of instructional material

Order Details 021.10000  FL 100  Strain Gauge Training System

Documentatie

Foto's