Compression Refrigeration System ET 411C

Compression Refrigeration System

Type: ET 411C
Name: Compression Refrigeration System
Categorie:
Technical Description

  The setup of ET 411C represents a typical refrigeration circuit consisting of a hermetic compressor, condenser, evaporator and expansion element. Evaporator and condenser are designed as finned tube heat exchangers. The pipes of both heat exchangers are partially transparent to visualise the process of the phase transition during evaporation and condensing. Three capillary tubes of different lengths and a thermostatic expansion valve can be compared as expansion elements. 
  The trainer is equipped with a receiver for refrigerant. Using the receiver, refrigerant can be added to or removed from the refrigeration circuit. This allows for the effects of overfilling or underfilling of the system to be examined.
  The flow rate of the refrigerant is read from a flow meter. Temperature and pressure in the refrigeration circuit and the electrical power consumption of the compressor are recorded by sensors. The measured values can be read on digital displays. At the same time, the measured values can also be transmitted directly to a PC via USB. The data acquisition software is included. Parameter changes in the refrigeration circuit can be viewed dynamically in the software's log p-h diagram.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 
Learning Objectives / Experiments

- function and operational behaviour of the

  refrigeration circuit components
- operation with expansion valve or with capillary

  tubes of different lengths
- underfilling or overfilling with refrigerant
- thermodynamic cycle in the log p-h diagram
- from the log p-h diagram and in comparison

  with the measured values

  * determination of the refrigeration capacity
  * determination of the coefficient of performance
  * determination of the efficiency of the compressor

Features

* Compression refrigeration system with transparent

  evaporator and transparent condenser1
* Compare different expansion elements1
* Effect of under/overfilling of the system with

  refrigerant

Alternative products
ET 350 -- Changes of State in the Refrigeration Circuit
ET 352 -- Vapour Jet Compressor in Refrigeration Engineering
ET 400 -- Refrigeration Circuit with Variable Load
Specification [1] investigation of a refrigeration system with different expansion elements
[2] refrigeration circuit consisting of a hermetic compressor, condenser, evaporator and expansion element
[3] transparent finned tube heat exchangers as condenser and evaporator to observe the phase transitions of the refrigerant
[4] expansion valve and capillary tubes of different lengths as expansion elements
[5] receiver for underfilling/overfilling the system with refrigerant
[6] sensors record pressure and temperature
[7] compressor equipped with two pressure switches
[8] GUNT software for data acquisition via USB under Windows Vista or Windows 7
[9] refrigerant R134a, CFC-free
  Technical Data

Compressor
- power consumption: 213W at 7,2°/32°C
- refrigeration capacity: 372W at 7,2/32°C
Condenser and evaporator with fan
- max. volumetric air flow rate condenser: 300m³/h
- max. volumetric air flow rate evaporator: 180m³/h
Capillary tubes: 1,5m, 3m, 6m
Receiver for refrigerant: 1,3L
 

Measuring ranges
- pressure: -1...9bar / -1...24bar
- temperature: 4x -40...150°C, 1x -100...100°C
- flow rate: 2...18m³/h
- electric power consumption: 0...1000W

 

Dimensions and Weight

LxWxH: 1740x800x1780mm
Weight: approx. 190kg

Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase Scope of Delivery

1 trainer

1 GUNT software CD + USB cable

1 set of instructional material

Order Details

061.411C0  ET 411C  Compression Refrigeration

                                    System


Documentatie

Foto's