Wind Power Plant ET 220.01

Wind Power Plant

Type: ET 220.01
Name: Wind Power Plant
Categorie:
ET 220.01 - A product from the GUNT 2E range
Technical Description

  The yield of a wind power plant depends on the prevailing wind speeds and the usability of the electricity generated. In order to study the operation of a wind power plant under real weather conditions, ET 220.01 was developed for the ET 220 experimental system.
  The ET 220.01 wind power plant consists of an engine room, also called a nacelle, mounted on a pivoting mast with a stable base and supports. The speed of the rotor and the wind speed are measured.  These measured values are displayed on the control unit and in the ET 220 software. The ET 220 control unit measures the generator's current and voltage. It is also possible to connect the accompanying battery to the wind power plant via a charge controller.
  The rotor is aligned to the wind direction by means of a vane on the nacelle. The rotor hub contains a mechanical capacity controller that uses rotor blade adjustment. The wind power plant generates a direct current at a wind speed of about 5m/s. A rectifier is integrated in the nacelle.
  Before commissioning, ET 220.01 must be connected to the control unit of ET 220. Cables are provided for this purpose, separated for the sensors and the generated electricity. It is easy to change the location of the ET 220.01 wind power plant. To do this, the device is dismantled and can easily be transported on rollers. The device is weather resistant so that it can also be operated in bad weather periods over several days.
  The well-structured instructional materials for ET 220 and ET 220.01 set out the fundamentals and provide a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- conversion of kinetic wind energy into electrical

  energy
- design and function of a wind power plant in stand-

  alone operation
- energy balance of a wind power plant under real

  wind conditions

Features

* Practical experiments under real wind conditions 1
* Wind power plant with rectifier and mechanical

  capacity controller 1
* Easier installation due to removable supports and

  hinged mast

Available accessories
ET 220 -- Energy Conversion in a Wind Power Plant
ET 220.10 -- Control Unit for Wind Power Plant ET 220.01
Overview
Wind Turbines
Specification

[1] wind power plant for ET 220 for converting kinetic wind energy into electrical energy
[2] movable wind power plant that can be set up outside
[3] four base supports for stabilisation
[4] stand-alone operation with connection to ET 220
[5] generator for converting kinetic energy into electrical energy
[6] accumulator for storing the electrical energy
[7] measurement of wind velocity
[8] measurement of the rotational speed of the rotor
[9] display of the measured data on the ET 220 control unit

 

Technical Data

Rotor
- diameter: 1200mm
- hub height above ground level: approx. 5000mm
Generator
- max. output: 350W
- voltage: 12VDC
- max. charging current: 30A
Accumulator
- voltage: 12VDC
- capacity: 65Ah

 

Measuring ranges
- wind velocity: 0,7...50m/s
- speed: 0...3000min-1
Space requirement
- LxWxH: 10x6x6m
- max. distance from ET 220: approx. 20m

 

Dimensions and Weight LxWxH: 3500x3500x5600mm (with base supports)
Weight: approx. 320kg Scope of Delivery 1 wind power plant
1 mast base
1 mast
4 base supports
1 accumulator
1 set of screws
1 set of tools
1 set of instructional materials
Order Details 061.22001  ET 220.01  Wind Power Plant

Documentatie

Foto's