Exhaust Gas Calorimeter For ct 300 CT 300.01

Exhaust Gas Calorimeter For ct 300

Type: CT 300.01
Name: Exhaust Gas Calorimeter For ct 300
Categorie:
Description

Determination of the thermal exhaust gas losses is essential when calculating an energy balance for internal combustion engines. Calorimetric measurement is an established method of doing this. It involves a largely complete and loss-free heat exchange between the exhaust gas and a cooling medium.

The exhaust gas calorimeter consists of an insulated stainless steel tank, through which the exhaust gas flows from bottom to top. While doing this, the exhaust gas gives up its heat almost completely to a finned pipe with cooling water flowing through it. The pipe is arranged in loops to achieve the maximum possible heat exchange area. Relevant temperatures (water and exhaust gas inlet and outlet) and the flow rate of the water are recorded electronically and displayed digitally using a measuring amplifier. The measuring amplifier is connected to the CT 300 test stand using a data cable. This allows the measured data from the CT 300 to be stored and processed using software for data acquisition.

The CT 300.01 is connected to a test engine (CT 300.03 – CT 300.05) using a heat-resistant exhaust gas hose.

Technical details
Specification
  • determination of the amount of heat contained in the exhaust gas from test engines
  • calorimeter consisting of finned pipe heat exchanger and insulated tank
  • instrumentation: 4 temperature sensors, flow meter in CT 300
  • measuring amplifier with digital displays
  • connection between engine and calorimeter using exhaust gas hose
  • GUNT-software for calorimetric test included in CT 300 software
  • connection between measuring amplifier and CT 300 using data cable
  • Technical data

    Calorimeter

    • insulated, stainless steel

    Finned pipe heat exchanger

    • heat exchange area on exhaust gas side: 1,169m2
    • heat exchange area on water side: 0,164m2

    Measuring ranges
    • temperature:
      • 2x 0…600°C (exhaust gas)
      • 2x 0…200°C (cooling water)
    • flow rate: 0…160L/h

    230V, 50Hz, 1 phase
    230V, 60Hz, 1 phase
    120V, 60Hz, 1 phase
    UL/CSA optional

    Dimensions and weight

    LxWxH: 570x570x1300mm (calorimeter)
    LxWxH: 370x300x150mm (measuring amplifier)
    Weight: approx. 105kg

    Required for operation

    cold water connection 200L/h
    drain

    Documentatie

    Foto's